is_callable also takes the php.ini "disable_functions" setting into consideration; it will return false for functions that have been disabled by your administrator.
is_callable
(PHP 4 >= 4.0.6, PHP 5)
is_callable — 引数が、関数としてコール可能な構造であるかどうかを調べる
説明
bool is_callable ( mixed $var [, bool $syntax_only [, string &$callable_name]] )引数の内容が、関数としてコール可能かどうかを調べます。 変数が有効な関数名かどうかを調べたり、配列の中に適切に エンコードされたオブジェクトと関数名が格納されているかどうかを 調べたりすることが可能です。
var は、関数名を格納した文字列か、あるいは 以下のようにオブジェクトとメソッド名を格納したオブジェクトとすることが 可能です。
array($SomeObject, 'MethodName')
syntax_only が TRUE の場合、この関数は 単に var が関数またはメソッドであるかどうか だけを調べます。文字列以外の型の変数や、不正な形式の配列は 引数として受け付けられません。有効な配列の形式は、最初のエントリが オブジェクトあるいは文字列で、2 番目のエントリが文字列である 2 つのエントリからなるものです。
callable_name 引数は "呼び出し名" を受け取ります。下の例では "someClass:someMethod" です。これは someClass::SomeMethod() が static メソッドであるかのように 見えますが、そうではないことに注意しましょう。
<?php
// 変数が、関数としてコール可能かどうかを確かめます。
//
// 関数名を含む単純な配列
//
function someFunction()
{
}
$functionVariable = 'someFunction';
var_dump(is_callable($functionVariable, false, $callable_name)); // bool(true)
echo $callable_name, "\n"; // someFunction
//
// メソッドを含む配列
//
class someClass {
function someMethod()
{
}
}
$anObject = new someClass();
$methodVariable = array($anObject, 'someMethod');
var_dump(is_callable($methodVariable, true, $callable_name)); // bool(true)
echo $callable_name, "\n"; // someClass:someMethod
?>
function_exists() および method_exists() も参照ください。
is_callable
cipri at php dot net
15-Jun-2007 11:24
15-Jun-2007 11:24
hcblue
25-Aug-2006 05:51
25-Aug-2006 05:51
True that method_exists() is faster than is_callable(). However, is_callable() will be able to correctly recognize method calls handled by __call() in PHP 5, while method_exists() will not.
jphp at dsf dot org dot uk
12-Feb-2006 08:38
12-Feb-2006 08:38
bob at theshirdshift:
"function_exists" doesn't do this, no, but "method_exists" works fine, and is still faster than is_callable:
<?php
function doTimes($start, $end)
{
$start_time = explode (" ", $start);
$start_time = $start_time[1] + $start_time[0];
$end_time = explode (" ", $end);
$end_time = $end_time[1] + $end_time[0];
$time = $end_time - $start_time;
return $time;
}
class test
{
function test()
{
return true;
}
}
$test = new test;
$callableIsTrue = false;
$startIsCallable = microtime();
for($i = 0; $i < 10000; $i++)
{
if(is_callable(array('test', 'test'))) { $callableIsTrue = true; }
}
$endIsCallable = microtime();
$existsIsTrue = false;
$startExists = microtime();
for($i = 0; $i < 10000; $i++)
{
if(method_exists('test', 'test')) { $existsIsTrue = true; }
}
$endExists = microtime();
$timeIsCallable = doTimes($startIsCallable, $endIsCallable);
$timeExists = doTimes($startExists, $endExists);
echo "<b>is_callable = ".($callableIsTrue ? "TRUE" : "FALSE")."</b>, \n";
echo "<b>method_exists = ".($existsIsTrue ? "TRUE" : "FALSE")."</b><br>\n";
echo "<br>Did 10000 is_callables in ".$timeIsCallable." seconds";
echo "<br>Did 10000 method_exists in ".$timeExists." seconds";
?>
is_callable = TRUE, method_exists = TRUE
Did 10000 is_callables in 0.410346984863 seconds
Did 10000 method_exists in 0.175447940826 seconds
yetanotheruser at hotmail etc
15-Dec-2005 11:47
15-Dec-2005 11:47
I have come across a strange oddity in versions around the 4.3.11 mark - I may have missunderstood the purpose of this function but hope this'll be helpful for some.
The point the code below is supposed to illustrate is that in some cases with
<? $myFunc = Array( $myObj, 'myMethod' ); ?>
<? is_callable( $myFunc, true, $callMe ); ?>
will return true, and give you $callMe set to myObj::myMethod but calling
<? $callMe(); ?>
doesn't work... however calling
<? $myFunc[0]->$myFunc[1](); ?>
seems to work fine..
... the reason all the code is down there is I think this oddity is due to how/the order in which I've instantiated my classes or something...
anyhow... HTH someone! :-)
Code follows:
FILE 1 :
<?
include('myTools');
$foo = new myClass();
print $foo->getMySource();
class myClass{
var $flibble = 'wibble';
function myClass(
// Initialise loads of stuff.. including..
$this->tools = new myTools();
)
function getMySource(){
// This just returns the source.. ok, like some HTML to go into an email for example.
// Some arguments;
$args = $this->flibble;
// Call our Tool that returns the source..
$source = $this->tools->returnSource( Array ( $this, 'someHTML' ), $args );
// and return it..
return ( $source );
}
function someHTML($args){
// Leave PHP
?>
Here is some HTML.. that we want to build outside a PHP block,
possibly just cos it's tidier in <B>your favourite text editor</B>..
.. or you want this function to be elsewhere.. for your designers
to play with etc.. ... incidentally I'd like to say "<?=$args?>" etc.
<?
// .. and we're back.
}
}
?>
FILE 2:
<?
/* OK - this is some other big library and a whole load more
faff but this is the particular function in question... it
just calls the function it's been asked to and uses an output
buffer to grab the output and return it as a string rather than
letting it go to terminal/browser.... useful for grabbing PHP pages
for spidering, emailing etc. etc. etc..
*/
class myTools(){
function returnSource($func, $args){
if ( is_callable ( $func, true, $callMe ){
// Start a buffer
ob_start();
// Calling the function like this DOESN'T seem to work:
// ~~~~~~~~
// "Command not found : myClass::someHTML"
// $callMe($args);
// ~~~~~~~~
// But - what I've discovered is that this behaves fine..
if ( is_array($func) ){
$func[0]->$func[1]($args);
} else {
$func($args);
}
// Then we just carry on with our code..
$rtn = ob_get_contents();
ob_clean();
return ( $rtn );
} else {
error_log("Doh!");
}
}
}
?>
empyone at tiscalinet dot it
09-Nov-2005 05:41
09-Nov-2005 05:41
To corey at eyewantmedia dot com:
your misunderstanding lies in passing in the naked $object parameter. It is correct for is_callable to return FALSE since you cannot 'call an object', you can only call one of its methods, but you don't specify which one. Hence:
is_callable(array($object, 'some_function'), [true or false], $callable_name)
will yield the correct result.
Notice, though, that a quick test I made (PHP 5.0.4) showed that is_callable incorrectly returns TRUE also if you specify the name of a protected/private method from outside of the context of the defining class, so, as wasti dot redl at gmx dot net pointed out, reflection is the way to go if you want to take visibility into account (which you should for true OOP, IMHO).
wasti dot redl at gmx dot net
09-Oct-2005 08:14
09-Oct-2005 08:14
The way to discover whether a method exists in face of a __call is reflection.
It should be mentioned that although array('Test', 'func') is callable according to this function (where func is a public static method of Test), actually calling this construct as $fn() fails.
corey at eyewantmedia dot com
19-Mar-2005 08:39
19-Mar-2005 08:39
I've been spending a month on and off trying to figure out why
is_callable($object, [true or false], $varContainingFunctionName)
returned false when it should not have (ie: $object->FunctionName() was callable), I realized I must have misunderstood its purpose. If you find yourself in the same situation, try
function_exists(string functionname)
or
method_exists ( object object, string method_name )
before you rip your hair out :)
mcroghan at digitalkeg dot com
11-Feb-2005 12:36
11-Feb-2005 12:36
Be careful when using this function and __call (PHP5). This function will always report true when using __call.
Need a specific function for the purpose of checking if a class method exists explicitly even when using __call.
Haven't ruled out the possibility of the existence of such a function yet. So if someone knows of one, please point it out.
bob at thethirdshift dot net
24-Jun-2004 01:54
24-Jun-2004 01:54
I, too, was wondering whether is_callable or function exists is faster when checking class methods. So, I setup the following test:
<?php
function doTimes($start, $end)
{
$start_time = explode (" ", $start);
$start_time = $start_time[1] + $start_time[0];
$end_time = explode (" ", $end);
$end_time = $end_time[1] + $end_time[0];
$time = $end_time - $start_time;
return $time;
}
class test
{
function test()
{
return true;
}
}
$callableIsTrue = false;
$startIsCallable = microtime();
for($i = 0; $i < 10000; $i++)
{
if(is_callable(array('test', 'test'))) { $callableIsTrue = true; }
}
$endIsCallable = microtime();
$existsIsTrue = false;
$startExists = microtime();
for($i = 0; $i < 10000; $i++)
{
if(function_exists('test::test')) { $existsIsTrue = true; }
}
$endExists = microtime();
$timeIsCallable = doTimes($startIsCallable, $endIsCallable);
$timeExists = doTimes($startExists, $endExists);
echo "<b>is_callable = ".($callableIsTrue ? "TRUE" : "FALSE")."</b>, \n";
echo "<b>function_exists = ".($existsIsTrue ? "TRUE" : "FALSE")."</b><br>\n";
echo "<br>Did 10000 is_callables in ".$timeIsCallable." seconds";
echo "<br>Did 10000 function_exists in ".$timeExists." seconds";
?>
This gives the output :
is_callable = TRUE, function_exists = FALSE
Did 10000 is_callables in 0.0640790462494 seconds
Did 10000 function_exists in 0.0304429531097 seconds
So the fact that function_exists is twice as fast is slightly over shadowed by the fact that it doesn't work on class methods, at least not as far as I can tell.
webmaster __AT__ digitalanime __DOT__ nl
04-Apr-2004 07:30
04-Apr-2004 07:30
<?php
while(list($key,$value)=each($HTTP_POST_VARS))
{
$tmpVar = 'return isset($' . 'this->' . $key . ');';
if(is_callable($key) && eval($tmpVar) && trim($value) != "")
{
$tmpSet = '$this->set' . ucfirst($key) . "('" . $value . "');";
eval($tmpSet);
}
}
?>
Why do you use this?
Isn't this a better solvation (or.. Whatever :P)
<?php
foreach($_POST as $key => $value)
{
if(is_callable($key) && isset($this->{$key}) && trim($value != '')
{
$this->{'set' . ucfirst($key)}($value);
}
}
?>
Tada.. Variable objects, that's what they are..